News

Ten Solutions to Abnormal Noise from Large Crushing Hammers

2023-09-27

1. Check the components of the crushing hammer to see if there are any worn or damaged areas. 2. Check if the crushing hammer is installed correctly and if all screws are tightened.

Introduction to the advantages and performance of vertical crushing hammer

2023-09-27

Efficient crushing ability: The vertical crushing hammer has extremely strong crushing ability, which can efficiently crush hard materials such as rocks and concrete.

Detection direction for problems with the piston cylinder body of the crushing hammer during use

2023-09-27

Increase in piston clearance: Due to long-term use or damage, the gap between the piston and the cylinder body becomes larger, leading to an increase in compressed gas leakage and affecting the working effect of the crushing hammer.

What are the general reasons for the pressure relief of a crushing hammer?

2023-09-27

Breaking hammer pressure relief refers to the inability of the hammer body to establish sufficient working pressure when using the breaking hammer, resulting in the inability to break materials normally.

According to which devices are hydraulic crushing hammers operated

2023-09-27

Hydraulic crushing hammers rely on hydraulic power devices to achieve the effects of impact, hammering, and crushing. Hydraulic crushing hammers have a series of advantages such as wide habits, high working power, and are widely used in mining, metallurgy, transportation, railways, tunnels, and other work.

The sales of crushing hammers surged in the first half of the year

2023-09-27

Recently, with the strong recovery of the Chinese construction machinery industry market and the important period of national supply side reform in 2017, Yantai Baitai Heat Treatment seized the opportunity,

Oil leakage treatment of crushing hammer

2023-08-15

When there is oil leakage at low pressure, there is no leakage at high pressure. The reason for this is poor surface roughness during assembly. Improve the surface roughness to reach 3.2-6.3umry and use sealing elements with lower hardness

Common Knowledge on the Selection and Use of Hydraulic Crushing Hammers

2023-08-15

Hydraulic crushing hammer is a crushing machine that converts hydraulic energy into mechanical impact energy. It mainly uses hydraulic machinery such as excavators and loaders as load-bearing equipment, and has the advantages of high efficiency, low cost, high reliability, and high safety.

Maintenance methods and measures for hydraulic systems of commonly used construction machinery

2023-08-15

For mechanized construction enterprises, the good technical condition of construction machinery is a direct factor in whether the enterprise can produce normally. For hydraulic transmission construction machinery, the normal operation of the hydraulic system is a main indicator of its good technical condition.

Classification of Crushing Hammer Shells

2023-04-27

Breaking Hammer is our company's main product. With a unique aesthetic perspective,exquisite professional skills,and first-class service,we provide you with satisfaction.Below,the editor will introduce the classification of crushing hammer shells.

Explanation of installation methods for wood grabbers

2023-04-26

Wood grab is an important excavator accessory,which is mainly used in the handling and handling of waste metal,stones,waste steel,sugarcane,cotton,and wood.

How to select a quick connector

2023-04-26

One of the key components in liquid cooling systems is the quick connector.These quick connectors connect the hoses carrying cooling liquid to the individual servers and central manifolds on the server rack(connected to the central heat exchanger),making it increasingly important to quickly connect because the connectors need to remain connected for a long time,but can be easily disconnected afterwards,and the valves will not fail.