News
27
2023
-
09
Ten Solutions to Abnormal Noise from Large Crushing Hammers
Author:
1. Check the components of the crushing hammer to see if there are any worn or damaged areas.
2. Check if the crushing hammer is installed correctly and if all screws are tightened.
3. Check the hydraulic system of the crushing hammer to see if there are any oil leaks or other faults.
4. Check if the cylinder of the crushing hammer is working properly and if the cylinder seal needs to be replaced.
5. Check whether the vibration frequency of the crushing hammer meets the set requirements.6. Check if the co
nstruction ground is level, uneven ground can easily cause abnormal sound from the crushing hammer.
7. Check whether the impact force of the crushing hammer is adjusted to the appropriate range.
8. Check if the hydraulic oil of the crushing hammer meets the specifications and if the oil needs to be replaced.
9. Check whether the various components of the crushing hammer are stuck and whether they need to be readjusted.
If none of the above solutions are feasible, it is necessary to replace the crushing hammer or repair it.
Related News
Questions? Contact Us
Contact Info
Address：No.10-1, Zhongshan Street, Guangzhou Road, Yantai Area, China (Shandong) Pilot Free Trade Zone
Tel：+86-535-6958690
Phone：+86-18865692555